Stone Double-Stage Pulverizer/Crusher

Stone double-stage pulverizer/crusher

Applicable materials:Suitable for calcite, limestone, brick factory cinder, slag, slag, shale, coal gangue, construction waste, construction waste and other wet materials crushing

Application scope: Can be used in building materials, cement, metallurgy, construction, highways, railroads and other fields.

  • Feed size:≤200mm
  • Productive capacity:10-120t/h

Product Description:

 

Stone double-stage pulverizer/crusher Broken renderings

 

Stone double-stage pulverizer cooperates with trommel screen, which is a common technology for crushing coal gangue in brick factories. After the first crushing of double stage crusher, the discharging granularity of material less than 3MM can reach about 80%. But because bricks require high fineness of coal gangue, so often customers will say, the finer the coal gangue broken, the better. This will have to go through the second crushing, that is, the first broken coal gangue is transported to the trommel screen through the conveyor, does not meet the fineness of coal gangue back to the double stage crusher for the second crushing, so the problem is solved.

There are more types of stone crusher, in the stone plant, the more common stone crusher are jaw crusher, cone crusher, hammer crusher, impact crusher, roller crusher, double-stage crusher, mobile crusher, etc., and the stone double-stage crusher is one of the necessary equipment for stone processing plant.

Stone double-stage pulverizer Product  Feature:

 

The application of the double stage crusher:

Stone double-stage pulverizer

 

The double stage crusher can crush common materials such as coal gangue, shale, coal gangue, slag, cement, river pebbles, iron ore, limestone, etc. More than 500 construction industries and other industry materials.The machine is equivalent to two hammers broken into one, reasonable combination into one whole, two sets of rotors are used in series, with the following characteristics:

1.the double rotor up and down two-stage crushingThe two sets of rotors connected in series make the hammer of the lower rotor which is crushed by the hammer of the upper stage immediately crushed again by the hammer of the lower stage which is rapidly rotating, and the materials of the inner cavity collide with each other in a reverse direction and pulverize each other to reach the hammer powder and material. The effect of the powder is directly discharged.

  1. there is no screen bottom, high humidity materials, never blockThe traditional crusher with sifting sieve is not suitable for raw materials with water content higher than 8%. When the moisture content of raw materials is higher than 10%, it is easy to cause serious blockage, so that the hammer can not rotate, the material

Working principle:

 

Double rotor up and down double stage crusher: The raw materials enter the crushing chamber from the feed port. The first group of hammers turn downward counterclockwise to beat the materials and smash each other to achieve the effect of hammering powder and powder. Then, the second group of hammers repeatedly beat the materials, and the two groups of hammers beat the materials at high speed.

Product parameter

Specification and model
Feed size
Discharge size
Productive capacity
SCF600x400
≤200mm
≤3mm

(Less than 2mm approx

More than 85%)

10-15t/h
SCF600x600
≤300mm
20-25t/h
SCF800x600
≤400mm
40-50t/h
SCF800x800
≤450mm
50-60t/h
SCF1000x800
≤500mm
70-80t/h
SCF1100x1000
≤550mm
70-100t/h
SCF1400x1200
≤550mm
90-110t/h

Performance advantages:

1. Double rotor up and down crusher

2. Double rotor two-stage grinding, high yield

3. No screen grate bottom, high humidity material is not blocked

4. Wear-resistant combination hammer

5. Shift clearance technology

6. Hydraulic start, only one person can open and close

LEAVE message

Welcome to consult us at any time, we will be the first time to reply!

     

      Online
      Whatsapp
      +86-18339818180
      Wechat
      +86-18339818180
      Inquiry